What to do if the camera stopps working and there is no indicator light?

What to do if the camera stopps working and there is no indicator light?

For this issue, please check it out by following the below steps.
1. Find another power adapter to replace our match power adapter to see if the indicator turns to red light. Normal phone adapter would suit.
2. Find another power line to replace our match power line to see if the indicator turns to red light. Normal phone power line would suit.
3. Replace both the power adapter and power line to see if the indicator turns to red light. 
4. Power on one of your other devices like your Android cell phone or USB fan with our camera power adapter and power cable to see if it works.

    • Related Articles

    • Camera doesn't even have a red flashing light that it's on even though it's plugged in

      ① Could you please power off the camera for 3–5 minutes, then plug it in and reset it? The reset button is on the back of the camera. Press it firmly for 5 seconds to see if you can hear the tone and see the red light flash. ② Still No light even ...

    • Troubleshooting your Camera Status Light?

      Solid Red Light Check to see if you are using the power cable and plug that came packaged with the camera. If you are NOT, please switch to the power cable and wall plug that came with the camera to see if this resolves the issue. If you are using ...

    • How to check if the camera is in connecting mode?

      First you need to power up the camera, then you can check the status of the indicator light. If the camera is in connecting mode, the light should be as following :

    • How to Set Up My Smart Camera?

      Below are tips and steps for you to follow to connect your camera. Warm Tips: 1. Please connect your phone with 2.4GHz Wi-Fi first, then connect your camera (the camera does not support 5GHz Wi-Fi). If you are using a dual-band router, please ensure ...

    • How to connect the camera using EZ mode?

      1.Link Smartphone to a Wi-Fi network. 2.Power up the camera and wait until the light blinks. 3.Open APP, tap the ‘+’ in the upper right-hand corner, then tap ‘Add Device’. 4.Select the camera model you wish to connect, tap the icon ‘ ⇄’, change to EZ ...