How to connect the camera using EZ mode?

1.Link Smartphone to a  Wi-Fi network.

2.Power up the camera and wait until the light blinks.

3.Open APP, tap the ‘+’ in the upper right-hand corner, then tap ‘Add Device’.

4.Select the camera model you wish to connect, tap the icon ‘ ⇄’, change to EZ Mode, and select ‘confirm that the indicator is blinking’.

5.Input the Wi-Fi password and tap Next. 

6.The App will search the device automatically. Wait a while; the indicator shall turn blue/green/white and blink no more, and the connection succeeds.

Note: 

Please check if your the camera of your support only 2.4Ghz network, if so, please make sure your wifi is on 2.4Ghz frequency before connection.

Please check if the camera is in connecting mode before connection.

If your router has IPv6 enabled, we recommend that you disable IPv6

Ensure the app has been granted all necessary permissions.

If the camera fails to connect, you can conact our Live chat help center or send an email to our support center for help.

• Related Articles

• How to connect the camera using bluetooth mode?

  Not all camera support the bluetooth mode, please check if your camera has this option. 1.Please make sure you have granted permission of Bluetooth to the App. 2..Link Smartphone to a 2.4Ghz Wi-Fi network. 3.Open APP, tap the ‘+’ in the upper ...

• How to connect the camera using QR code.

  1.Link your phone to WiFi network. Open the App, click on the "+" in the top right corner, then click on "Add Device". 2. Choose the correct camera model. 3.Click on “Confirm that the indicator is blinking” then click on“Next”. 4. Select your Wi-Fi, ...

• How to check if the camera is in connecting mode?

  First you need to power up the camera, then you can check the status of the indicator light. If the camera is in connecting mode, the light should be as following :

• How to connect the camera to your phone using a mobile hotspot?

  Step1：Enable mobile hotspot on your phone How to enable mobile hotspots on iPhone or iPad? Please note your iPad will need to support both WiFi + Cellular with an activated SIM card inserted and not an iPad model that supports WiFi only. 1. Open the ...

• Private/Sleep Mode

  After the privacy mode of the camera is turned on, the camera will enter standby mode. In this state, all the functions of the camera will be suspended. Until you manually turn off the privacy mode, the camera will re-enter the working state, and all ...