How to connect the camera using QR code.
1.Link your phone to WiFi network. Open the App, click on the "+" in the top right corner, then click on "Add Device".
2. Choose the correct camera model.
3.Click on “Confirm that the indicator is blinking” then click on“Next”.
4. Select your Wi-Fi, then enter your Wi-Fi name and password correctly and click “Next”.
5. Use the camera to scan the QR code directly on your phone (15-20cm), you may need to move your phone up and down, left and right slightly and slowly.
6.When you hear the prompting voice, tap on “I Heard a Prompt” and wait.
7.The APP will tell you that the camera has been added successfully, then your camera's light will turn solid green/blue/white
Note:
Please check if your the camera of your support only 2.4Ghz network, if so, please make sure your wifi is on 2.4Ghz frequency before connection.
Please check if the camera is in connecting mode before connection.
If your router has IPv6 enabled, we recommend that you disable IPv6
Ensure the app has been granted all necessary permissions.
If the camera fails to connect, you can conact our Live chat help center or send an email to our support center for help.
Related Articles
How to connect the camera using bluetooth mode?
Not all camera support the bluetooth mode, please check if your camera has this option. 1.Please make sure you have granted permission of Bluetooth to the App. 2..Link Smartphone to a 2.4Ghz Wi-Fi network. 3.Open APP, tap the ‘+’ in the upper ...How to connect the camera using EZ mode?
1.Link Smartphone to a Wi-Fi network. 2.Power up the camera and wait until the light blinks. 3.Open APP, tap the ‘+’ in the upper right-hand corner, then tap ‘Add Device’. 4.Select the camera model you wish to connect, tap the icon ‘ ⇄’, change to EZ ...How to connect the camera to your phone using a mobile hotspot?
Step1：Enable mobile hotspot on your phone How to enable mobile hotspots on iPhone or iPad? Please note your iPad will need to support both WiFi + Cellular with an activated SIM card inserted and not an iPad model that supports WiFi only. 1. Open the ...How to Set Up My Smart Camera?
Below are tips and steps for you to follow to connect your camera. Warm Tips: 1. Please connect your phone with 2.4GHz Wi-Fi first, then connect your camera (the camera does not support 5GHz Wi-Fi). If you are using a dual-band router, please ensure ...Troubleshooting your Camera Status Light?
Solid Red Light Check to see if you are using the power cable and plug that came packaged with the camera. If you are NOT, please switch to the power cable and wall plug that came with the camera to see if this resolves the issue. If you are using ...