What to do if the camera is offline?
If the camera is offline. Please check the indicatore light of the camera.
1)If the red/white is flashing, you can add the camera manually like the first time you did it.
2)If the light is a solid red or there is no light, please plug the camera out,then use another power cord or adapter and plug in again. Then use the reset button to reset the camera and reconnect it.
3)If the light is solid green/blue/white, please power off the camera for around 3 - 5 minutes then plug it in to see if the camera will be back online. If the camera is till offline, please reset the camera then reconnect it.
4)If the red and green lights flash alternately, please unplug the router and camera and then wait 3 - 5 minutes before plugging the camera in again, then press and hold the small reset button on the back of the camera for about 5 seconds to reset the camera until you hear prompt tone to reset it and the light flashes, then reconnect the camera.
Note:
For indoor cameras:
The reset button is on the back of the camera. Press it firmly for 5 seconds to see if you can hear the tone and see the red light flash.
If you hear the tone and the camera light flashes red, you can add it back to the application step by step as you did when you first added the camera.
For outdoor cameras：
Open the rubber cover on the camera and press and hold the small reset button for about 5 seconds
After hearing the voice prompt, wait for a moment. When you see the white light flashing, you can connect the camera again
If the camera is still offline or fails to reconnect, you can conact our Live chat help center or send an email to our support center for help.
Related Articles
How can I reconnect to the internet after changing providers? My camera is currently offline.
If you've changed your network provider, the camera needs to be reset to connect to the new network. Here are the steps: 1. Resetting the Camera: Press and hold the reset button for 5 seconds until you hear a tone and see the light flash. This will ...My camera moving by itself
If the camera moving by itself, please try the following troubleshooting steps to verify if the issue can be resolved. 1. If the network connection is poor, the camera would self-check and rotate by itself when it connects to the network again. 2. If ...Troubleshooting your Camera Status Light?
Solid Red Light Check to see if you are using the power cable and plug that came packaged with the camera. If you are NOT, please switch to the power cable and wall plug that came with the camera to see if this resolves the issue. If you are using ...How to turn off the camera?
If you want the camera to stop working, you can simply plug out the camera, and plug in again when you need it to work. If you want the camera to not load the live stream but still work at the background, you can activate the 'Private Mode'. 1.Enter ...How to manually control the camera's rotation?
You use the steering wheel in 'Directions' to control the camera's positions. 1.Enter the live stream page, click the rightmost features key. 2.Select 'Directions'.