Patrol

Your camera may be positioned to view a large space (like a barn), but you might only want to patrol a specific area (the entrance). You can specify the patrol zone.

This feature is only available on some cameras.

To turn on Patrol:

Before you turn on the Patrol, you need to set up more than 2 sites firstly, 6 sites can be added at most.

1. Please open the app, tap on your Camera

2. Tap Site

3. The camera is facing the area you want to patrol without turning, enter the site name and confirm

4. Tap the Direction, press the upper direction to turn to the second place you want to patrol, back to the site, enter the second site name, and confirm

5. Back to the Features

6. Tap the Patrol icon, then turn on Enable Patrol

7. You can choose to All-day-Patrol or schedule as your needs.

Additional Notes:

Patrol and Motion Detection work together can detect motion in a specific area.

• Related Articles

• My camera moving by itself

  If the camera moving by itself, please try the following troubleshooting steps to verify if the issue can be resolved. 1. If the network connection is poor, the camera would self-check and rotate by itself when it connects to the network again. 2. If ...