Can I set up scene automation to control my camera?

Yes, you can set the scene automation mode for the main functions of the camera.

First, you need to set the conditions and then select the corresponding camera to perform the function you want to achieve.

Here are the steps for you as a reference.

Let's take the example of wanting to start the camera in privacy mode between 9:00 am and 9:00 pm.

Open the app, click "Scene" under the app interface, select "Schedule", then select the time 9:00 am, and click "Repeat" above, 

Check all the times (so that it can be executed automatically every day), then click back, and click "Next" At this time, the time of 9:00 am is set.

Next, click the "+" next to "If" and follow the same steps as above to set the time for 9:00 pm, don't forget to select each day in Repeat.

Finally, click the "+" next to "Then", select "Run the device", then select the corresponding camera, select "Private Mode", click "off", click "Save", click "Next", click "Save", Select "Yes"

This completes the automation setup.

Other functions can also be set by yourself according to the above steps.

• Related Articles

• How to Set Up My Smart Camera?

  Below are tips and steps for you to follow to connect your camera. Warm Tips: 1. Please connect your phone with 2.4GHz Wi-Fi first, then connect your camera (the camera does not support 5GHz Wi-Fi). If you are using a dual-band router, please ensure ...

• How to manually control the camera's rotation?

  You use the steering wheel in 'Directions' to control the camera's positions. 1.Enter the live stream page, click the rightmost features key. 2.Select 'Directions'.

• Can I control my camera when I'm not at home?

  Yes. Once your camera has been successfully connected to the 2.4 GHz network, you can turn on your camera to watch the video and control your camera while your phone is connected to a different network. At the same time, you can also use your phone's ...

• My camera moving by itself

  If the camera moving by itself, please try the following troubleshooting steps to verify if the issue can be resolved. 1. If the network connection is poor, the camera would self-check and rotate by itself when it connects to the network again. 2. If ...

• Troubleshooting your Camera Status Light?

  Solid Red Light Check to see if you are using the power cable and plug that came packaged with the camera. If you are NOT, please switch to the power cable and wall plug that came with the camera to see if this resolves the issue. If you are using ...